DEVCON 10760
Harmonization Code : 3506.91.90.99 | Prepared glues and other prepared adhesives, not elsewhere specified or included; products suitable for use as glues or adhesives, put up for retail sale as glues or adhesives, not exceeding a net weight of 1 kg ; Adhesives based on polymers of headings 3901 to 3913 or on rubber; Other ; Other
Main features
- Titanium-Reinforced Epoxy Putty
- Non-Sag Placement Control
- Machinery Repair Applications
Product Description
DEVCON® Titanium Putty (10760) is a two-component, titanium-reinforced epoxy repair putty for rebuilding and restoring worn machinery and precision metal parts. The grey, non-sag material can be applied in sections up to 1/2 inch thick on vertical surfaces and cures to a machinable finish that can be drilled, tapped, painted, or machined. Typical cured performance includes 15,200 psi (105 MPa) compressive strength, 2,000 psi (14 MPa) adhesive tensile shear strength, and dry temperature resistance to 350°F (177°C). It is supplied as a premeasured resin-and-hardener system with a 21-minute pot life at 72°F (23°C).
Key features
- Titanium-reinforced repair putty: Restores worn or damaged metal parts requiring a durable, machinable finish.
- High compressive strength: Develops a typical compressive strength of 15,200 psi (105 MPa) after curing for 7 days at 75°F (24°C).
- Non-sag application: Can be troweled onto vertical surfaces at thicknesses up to 1/2 inch without sagging.
Applications / Suitable for
- Restoring bearing housings and scored shafts
- Rebuilding wear rings, hydraulic rams, and valves
- Repairing machinery and precision parts requiring a machined finish
Technical Specifications
Thermal Properties
Electrical Properties
Mechanical Properties
General Properties
Additional Information
As-supplied / before-processing properties
Typical uncured and processing properties at 72°F (23°C), unless otherwise stated. Values are representative and are not intended for specification purposes.
| Property | Value | Unit | Method / condition |
|---|---|---|---|
| Product form | Two-component putty | — | Resin and hardener |
| Color | Grey | — | Mixed material |
| Mix ratio by volume | 3.1:1 | — | Resin:hardener |
| Mix ratio by weight | 4.3:1 | — | Resin:hardener |
| Mixed viscosity | Putty | — | At 72°F (23°C) |
| Specific gravity | 2.36 | g/cm³ | Equivalent to 19.7 lb/gal |
| Pot life | 21 | minutes | At 72°F (23°C) |
| Functional cure | 16 | hours | At 72°F (23°C); cure time varies with application temperature |
After-processing / final-state properties
Typical cured properties measured after 7 days at 75°F (24°C), unless otherwise stated. Values are representative and are not intended for specification purposes.
| Property | Value | Unit | Method / condition |
|---|---|---|---|
| Adhesive tensile shear | 2,000 (14) | psi (MPa) | ASTM D1002; cured 7 days at 75°F (24°C) |
| Compressive strength | 15,200 (105) | psi (MPa) | ASTM D695; cured 7 days at 75°F (24°C) |
| Flexural strength | 7,700 (53) | psi (MPa) | ASTM D790; cured 7 days at 75°F (24°C) |
| Hardness | 87 | Shore D | ASTM D2240; cured 7 days at 75°F (24°C) |
| Modulus of elasticity | 9.5 × 105 (6.6) | psi (GPa) | ASTM D638; cured 7 days at 75°F (24°C) |
| Cured shrinkage | 0.0010 | in/in (cm/cm) | ASTM D2566; cured 7 days at 75°F (24°C) |
| Dielectric strength | 56 (2.2) | V/mil (kV/mm) | ASTM D149; cured 7 days at 75°F (24°C) |
| Temperature resistance | Wet: 150 (65); dry: 350 (177) | °F (°C) | Documented wet and dry temperature-resistance limits |
