MOLYKOTE G-0010
Harmonization Code : 3403.19 | Lubricating Preparations (With 70% or More Petroleum Oils) For Automotive and Other Uses
Main features
- Polyurea-Thickened Mineral-Oil Grease
- Above 260 deg C Dropping Point
- Corrosion-Preventive Bearing Grease
Product Description
MOLYKOTE® G-0010 Multipurpose Bearing Grease is a high-performance mineral oil-based grease thickened with a modern polyurea (di-urea) system. Engineered to provide extreme-pressure lubrication, this versatile grease delivers excellent low-temperature properties and high load-carrying characteristics. Thanks to its advanced polyurea thickener, it offers superior shear resistance, robust oxidation stability, and premium rust prevention across a variety of demanding industrial applications.
Key features
- Wide temperature capability: Provides reliable lubrication across an estimated service temperature range of -30°C to +170°C (-20°F to +340°F) and features a high dropping point over 260°C (525°F).
- Extreme-pressure & wear protection: Protects heavily loaded bearings with a 315 kg four-ball weld load and minimal wear scarring.
- Clean and stable formulation: Highly shear-resistant, formulated without intentional polytetrafluoroethylene (PTFE) or per- and polyfluoroalkyl substances (PFAS), and offers excellent corrosion prevention.
Applications / Suitable for
- Electrical motor and fan bearings
- Water pump bearings
- Dryers in the chemical and paper industries
TDS, SDS & Technical Documents
Technical Specifications
No specifications available.
Additional Information
As-supplied / before-processing properties
Typical properties; these values are not intended for use in preparing specifications.
| Property | Value | Unit | Method / condition |
|---|---|---|---|
| Chemical Composition | Mineral base oil, polyurea thickener, corrosion inhibitor | - | Organic grease |
| Appearance / Color | Green / Blue | - | Grease (Color varies between TDS and SDS) |
| NLGI Consistency Class | 2 | - | - |
| Base Oil Viscosity | 125 | mm²/s | at 40°C (ASTM D445) |
| Worked Penetration | 265 - 295 | mm/10 | ASTM D217 |
| Relative Density | 0.93 | - | Water = 1 |
| Flash Point | > 255 | °C | Seta closed cup (> 491 °F) |
| Usable Life | 60 | months | Stored between 0 and 40°C in unopened containers from date of production |
After-processing / in-service properties
Typical properties; these values are not intended for use in preparing specifications.
| Property | Value | Unit | Method / condition |
|---|---|---|---|
| Service Temperature Range | -30 to +170 | °C | (-20 to +340 °F) Estimated |
| Dropping Point | > 260 | °C | (> 525 °F) (ASTM D2265) |
| Four-Ball Tester Weld Load | 315 | kg | ASTM D2596 |
| Four-Ball Wear Scar | 0.60 | mm | 40 kg, 75°C, 1 hr (ASTM D2266) |
| Oil Separation | 2.3 | mass-% | 24 hrs at 100°C (FTMS 791C-321.2) |
| Evaporation Loss | 0.1 | mass-% | 24 hrs at 100°C |
| Corrosion Prevention | 1, 1, 1 Pass | - | ASTM D1743 |
| Dn Value | 400,000 | mm/min | Estimated |
