FREKOTE EXITT-I
Harmonization Code : 3403.19 | Lubricating Preparations (With 70% or More Petroleum Oils) For Automotive and Other Uses
Main features
- High-Gloss Molded-Part Finish Retention
- Urethane-Elastomer Mold Release
- Wipe, Brush, or Spray Application
Product Description
LOCTITE® FREKOTE® EXITT-I is a clear, solvent-based, sacrificial silicone mold release agent formulated to produce a high-gloss finish while retaining fine mold detail. The hydrocarbon-solvent formulation can be sprayed, wiped, or brushed onto clean steel, aluminum, epoxy, ceramic, and flexible mold surfaces. Developed particularly for urethane elastomer systems, it also supports the release of urethane foams, organic rubber compounds, and most specialty molding resins. One or two light, continuous coats are applied before molding, with additional touch-up coats used as required.
Key features
- High-gloss finish: Produces a high-gloss surface on molded parts.
- Fine-detail reproduction: Supports precise retention of mold detail.
- Minimal mold buildup: Documented as producing no mold buildup under the described use conditions.
- Flexible application: May be sprayed, wiped, or brushed onto the prepared mold surface.
- Quick-evaporating carrier: Uses a hydrocarbon-solvent carrier identified as quick evaporating.
Applications / Suitable for
- Urethane elastomer molding systems
- Urethane foam molding
- Organic rubber compounds
- Most specialty molding resins
- Steel, aluminum, epoxy, ceramic, and flexible mold surfaces
TDS, SDS & Technical Documents
Technical Specifications
General Properties
Additional Information
As-supplied / before-processing properties
Documented as-supplied and application characteristics of LOCTITE® FREKOTE® EXITT-I.
| Property | Value | Unit | Method / condition |
|---|---|---|---|
| Appearance | Clear liquid | — | As supplied |
| Product type | Sacrificial silicone mold release agent | — | One-part, solvent-based formulation |
| Solvent carrier | Hydrocarbon solvent | — | EXITT-I formulation; quick evaporation rate |
| Application method | Spray, wipe, or brush | — | Apply one or two light, continuous coats |
| Solvent-evaporation time | Virtually instantaneous to 60 | s | After each coat; depends on solvent evaporation rate and mold temperature |
After-processing / final-state properties
Documented characteristics associated with the applied EXITT-I release layer and molded-part finish.
| Property | Value | Unit | Method / condition |
|---|---|---|---|
| Molded-part finish | High gloss | — | Documented EXITT product characteristic |
| Mold-detail reproduction | Precise retention of mold detail | — | Qualitative product characteristic |
| Mold buildup | No mold buildup | — | Supplier-documented characteristic under the described application conditions |
